JOURNAL OF PROSTHETIC DENTISTRY THE

Vol. 102 No. 3      September - 2009

ISSN: 0022-3913      UBIC: 171

RESUMEN

Statement of problem. Although the esthetic outcome of a collarless metal ceramic restoration is superior to that of a restoration with a metal margin, its mechanical strength has not been evaluated. Purpose. The purpose of this study was to evaluate and compare the fracture resistance of metal ceramic restorations with metal margins to that of metal ceramic restorations with circumferential porcelain margins, after exposure to masticatory simulation. Material and methods. Twenty-four metal ceramic restorations were fabricated and paired with 24 cobalt-chrome tooth analogs. Twelve of the specimens had metal margins, while the remainder had circumferential porcelain margins. The restorations were cemented on the metal tooth analogs with a resin-modified glass ionomer luting agent (FujiCEM). All specimens were subjected to cyclic loading by a texture analyzer. A total of 600,000 loading cycles in an aqueous environment was performed, with a minimum load of 0 N and a maximum load of 200 N. Controlled loads were then applied to the teeth until fracture, using a stainless steel rod with a 2-mm-wide, rounded end, mounted in a universal testing machine. The specimens were examined under a stereomicroscope to determine failure mode. Descriptive statistics and the independent t test (α.;=.05) were used to determine the effect of failure loads among the tested groups. Results. The independent t test revealed statistically significant differences among the 2 tested groups (P<.001). The 2 groups presented different failure modes. Metal ceramic restorations with metal margins presented cohesive failures starting from the point of load application. Metal ceramic restorations with circumferential porcelain margins demonstrated a combination of adhesive and cohesive failures, starting from the point of load application and extending to the highest point of the proximal margins. Conclusions. Metal ceramic restorations with metal margins required significantly greater loads (P<.001) to fracture than metal ceramic restorations with circumferential porcelain margins. (J Prosthet Dent 2009;102:172-178)

| Volver |